- 17 -
or
Communication
cable
PC
Conversion unit
PLC
USB cable
(A-miniB type)
●Controller
●Controller setting kit
(Controller setting software,
Communication cable,
Conversion unit and
USB cable are included.)
Part No:LEC-W2
Controller setting
software
4. Product Outline
4.1 System construction
Warning
Refer to the operation manual of the LEC (controller) for detailed wiring.
/ See 5 Wiring of cables on p.35 .
Communication cable is to be connected to PC by USB cable through conversion unit.
Do not connect the teaching box directly to the PC.
Use only specified cables otherwise there maybe fire risk and damage.
The actuator body and controller are sold as a package.
If when only the actuator is purchased separately, confirm that the combination
of the controller, which you have and the actuator is compatible.
/ See 6.3 Caution (1) on p. 38
<Be sure to check the following before use.>
(1)
Check that actuator label for model number.
This matches the controller.
(2)
Check Parallel I/O configuration matches (NPN or PNP).
●I /O cable
Part No: LEC-CN5-*
●Teaching box
(With a cable of
3m long)
Part No:
LEC-T1-3EG
Power supply plug
<Applicable cable size>
AWG20 (0.5mm
2
)
To CN5
●Electric actuator
/Rod type
Option
Power supply
24VDC
To CN4
To CN1
To CN2
To CN3
Power supply
24VDC
●Actuator cable
Part No:
-LE-C*-*-*
(Robotic type cable)
-LE-C*-*S-*
(Standard cable)
(1)
(2)
LEY16B-100
NPN
Note 1)
Note 1)
Motor cable
Note 1): These items are included when it is
selected by ordering code.
Note 2): When conformity to UL is required, the
electric actuator and controller should
be used with a UL1310 Class 2 power
supply.
Note 1)
Note 2)
Note 2)
