![background image](http://html1.mh-extra.com/html/smc-networks/ley/ley_operation-manual_1299663032.webp)
- 31 -
2) Signals when Stopped: In the event when “EMG” is used
/ See 6.1 Caution (9) on p.36
The operating sequence is 1.”Stop”
2.Release the “Stop”
Procedure
Input signal
Output signal to the input
signal
Operation description
1
EMG:Not energizing
(TB / Stop switch:Locking)
*ESTOP [ ]
SVRE [ ]
SETON [
● ]
Power to the motor is cut by the “Stop”
command regardless of whether it is operating
or stopping.
2
EMG:Energizing
(TB / Stop switch:Releasing)
* ESTOP [
● ]
SVRE [
● ]
SETON [
● ] Note 2)
The stop is released.
Note 1)
[
●
]
means ON,
[
]
means OFF. *means negative logic
Note 2) SETON signal does not change after releasing the “STOP”
Note 3) If the stop is input from the EMG or RESET terminal or the stop-switch on the connected Teaching
Box during pushing operation,
t
he actuator stop.
(“Busy”signal turns OFF) And if the actuator stop within the range of ”Position”
±
”In pos” defined in
step data,output signal “INP” turns ON.