![background image](http://html1.mh-extra.com/html/smc-networks/ley/ley_operation-manual_1299663035.webp)
- 34 -
Initial setting for the ORIG parameters
Refer to the controller’s (LEC series) operation manual for detail.
As the “ORIG parameter” is unique data of each actuator, if an actuator other than the “electric actuator /
rod type” is used, refer to the operation manual of each actuator and the controller’s (LEC series)
operation manual for the ORIG parameter.
Note1) CCW direction: Retracted CW direction: Extended. Become effective after restarting the
controller.
Note 2) Return to origin cannot return while operating / See 6.1
caution(4) on p.37
WARNING
Do not alter any parameter except the ones shown. Or else there is a possibility of damage.
2) Method of changing direction of origin
Use the following procedures when you change the direction of the origin.
Procedure 1- In the [Parameter] 01 dialogue box select the ORIG tab.
And the direction of the starting point return is changed from CCW to CW.
Procedure 2- In the [Parameter] 01 dialogue box press the "Download All" radio button.
Procedure 3- Power supply OFF (
→ Power supply ON)
Description
(
Extract
)
Initial input value
Input range
ORIG direction
note1) CCW
1: CW , 2: CCW
ORIG mode
1:ORIG Press
-
ORIG limit
LEY16:100, LEY25:100, LEY32:100
LEY16A:150, LEY25A:200
-
ORIG time
100
-
ORIG speed
20
to 50 / LEY16*
To 35 / LEY25*
to 30 / LEY32 / LEY40
ORIG ACC /DEC
1000
-
Creep speed
10
-
ORIG sensor
0: Disable
-