SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
145
Field Name
Description
To
disable
this feature, click the
Disable
button.
Inform Interval
Enter the frequency (in seconds) at which the CPE (gateway) checks in with the ACS to sync and
exchange data. A typical production environment has CPEs informing to the ACS once a day or
every 86,400 seconds. The default is
3600
seconds (1 hour).
ACS URL
Enter the URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This
parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL indicates that the
ACS supports SSL. The "host" portion of this URL is used by the CPE for validating the certificate
from the ACS when using certificate-based authentication.
You can include a port specification suffix if your ACS platform requires it, e.g., http://-
customer1.acs.smartrg.com:30005 where 30005 is the port number. The default port is
30005
.
ACS User Name
Enter the user name by which this gateway logs in to the ACS. This is usually "admin".
ACS Password
Enter the password to authenticate the above user name. This is usually "admin".
WAN Interface used by
TR-069 client
Select
any_WAN
,
LAN
,
Loopback
or any configured connection to identify how this gateway
will connect to the ACS.
Display SOAP messages
on serial console
Select whether to enable the display of messages on consoles. The default is
Disable
.
3. (
Optional
) To configure the modem client Connection Request mechanism used by your ACS for communication with sub-
scriber gateways, click
Connection Request Authentication
. Additional fields appear.
Note:
Consult with your ACS vendor for any specific connection request requirement impacted by the following settings.
Field Name
Description
Connection Request Username Enter the user name by which this gateway authenticates the ACS. For example, many
ACS platforms use “admin” or “tr069”.
Connection Request Password
Enter the password by which this gateway will authenticate to the ACS.
Connection Request Port
(
Optional
) Enter the port number, e.g., "http://xxx.xxx.xxx.xxx:30005/" where the xxx
values are specific WAN IP octet numbers. The default port value is
30005
.
Connection Request URL
This URL is set automatically and cannot be changed. It includes the request port num-
ber, e.g., http://10.101.40.115:30005/.
4. To force the gateway to attempt to sync with the ACS, click the
GetRPCMethods
button. This will assist you in verifying
the TR-069 parameters entered above.
5. Click
Apply/Save
to commit your changes.
STUN Config
STUN stands for “Simple Traversal of UDP through NATs”. STUN enables a device to find out its public IP address and the type of
NAT service it is sitting behind.
STUN is most commonly used with older modems under ACS management connected via a NAT gateway. NAT accommodates a
LAN-side device that has been allocated a Private IP address such as a CPE device on a private network behind an ONT. In this