SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
78
1. On the MAC Filtering Setup page, click
Add
. The following page appears.
2. Fill in the fields, using the information provided in the following table. The
Protocol
field is required.
3. Click
Apply/Save
to commit your changes.
Field Name
Description
Protocol Type
Select the protocol associated with the device at the destination MAC address. Options are
PPPoE
,
IPv4, IPv6
,
AppleTalk
,
IPX
,
NetBEUI
, and
IGMP
.
Destination MAC
Address
Enter the MAC address of the device that you want to associate with this filter.
Source MAC Address
Enter the MAC address of the device that originates the requests intended for the device associated
with the
Destination MAC Address
.
Frame Direction
Select the incoming/outgoing packet interface. Options are
LAN<=>WAN
,
WAN=>LAN
, and
LAN=>WAN
. The default is
LAN<=>WAN
(both directions).
WAN Interfaces
Select the WAN interface(s) for which the filter should apply. Only interfaces configured for Bridge
mode are available.
Parental Control
In this section, you can manage time restrictions and block or allow specific URLs.
Time Restriction
On this page, you can control time restriction settings for a LAN device that connects to the gateway.
Note:
Before you can create a time restriction rule, the gateway's time must be set. You can do this on the Management > Inter-
net Time page.
