SmartRG SR516ac User Manual Download Page 110

Page: 110 / 158

110

2. If you want to view or configure the 2.4GHz band settings, click

2.4 GHZ Band

in the left menu.

3. Modify the settings as desired, using the information provided in the table below.
4. (

Optional

) Define up to three virtual access points for guest access using the information from the

Wireless - Guest/Vir-

tual Access Points

section of the table below.

5. Click

Apply/Save

to commit your settings.

Field Name

Description

Enable Wireless

This option is selected by default. To

disable

the wireless feature, clear the checkbox. All other fields

on the page are hidden.

Enable WiFi Button

This option is selected by default. To

disable

the gateway's 2.4GHz button, clear the checkbox.

Enable Wireless Hot-

spot 2.0

This option is disabled.

Hide Access Point

Click to hide the access point SSID from end users and passive scanning.

Clients Isolation

Click to prevent LAN client devices from communicating with one another on the wireless network.

Disable WMM Advertise Click to stop the wireless from advertising Wireless Multimedia (WMM) functionality. Selecting this

option can improve transmission performance for voice and video data.

Enable Wireless Mult-

icast Forwarding

This option is selected by default allowing multicast traffic to be forwarded across wireless clients. This

option can improve the quality of video services such as IPTV. To

disable

Wireless Multicast Forwarding

(WMF), clear the checkbox.

SSID

(

Optional

) Enter the WiFi SSID. For security purposes, this identifier should be unique for your system. If

your gateway is connected to an ACS, it is recommended that SSID names be be 1 - 32 characters long.

Special characters are accepted.

BSSID

Displays the Basic Service Set Identifier (BSSID), the MAC address assigned to the wireless router.

Country

This option is set by default and cannot be changed. The wireless channel adjusts to the frequency pro-

vision for the selected country.

Country RegRev

This option is set to

871

and cannot be changed.

Max Clients

Enter the maximum number of clients that can access the route wirelessly. Options are

through the

value set in the

Global Max Clients

field on the Wireless > Advanced page. The default is

Note:

Before you can change this setting, you must change the

Global Max Clients

setting.

Wireless - Guest/Virtual Access Points

section

Enabled

Click to enable a virtual wireless access point for guest access.

SSID

Enter the wireless SSID for guests to use.

Hidden

Click to hide the SSID from being broadcast publicly.

Isolate Clients

Click to prevent client PCs from communicating with one another.

Enable WMM Advertise Click to stop the wireless from advertising Wireless Multimedia (WMM) functionality.

Summary of Contents for SR516ac


























































































































































Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands

SmartRG SR516ac, User Manual

Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands