SmartRG SR516ac User Manual Download Page 98

Page: 98 / 158

2. To

disable

UPnP, click the

Enable UPnP

check box to clear it.

3. Click

Apply/Save

to save and apply the settings.

DNS Proxy

On this page, you can enable or disable the DNS proxy function. This function is enabled by default.

1. In the left navigation menu, click

Advanced Setup

DNS Proxy

. The following page appears.

2. To

disable

the DNS Proxy, click the

Enable DNS Proxy

checkbox to clear it.

3. To modify the host and domain, enter the host name of the new broadband gateway and the domain name of the LAN net-

work.

4. Click

Apply/Save

to implement the settings.

Interface Grouping

On this page, you can configure interface groupings. Interface grouping supports multiple ports to PVC and bridging groups. Each

group performs as an independent network. Only the default group has an IP interface. To support this feature, you must create

mapping groups with the appropriate LAN and WAN interfaces.

Summary of Contents for SR516ac


























































































































































Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands

SmartRG SR516ac, User Manual

Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands