SmartRG SR516ac User Manual Download

Page: 27 / 158

1. In the left navigation bar, click

Advanced Setup

Layer2 Interface

ETH Interface

. The following page appears.

2. To remove an entry, click the

Remove

checkbox next to the entry and then click the

Remove

button.

3. To add an entry, click

Add

. The following page appears.

4. Select the LAN port you want to use as a WAN port.
5. Click

Apply/Save

to commit your changes. The interface is added to the ETH WAN Interface Configuration page.

WAN Service

On this page, you can add, remove, or edit a WAN service. You must configure the related interface (ATM, ETH or PTM) first. You

can configure services for PPPoE, IPoE, and Bridging. A sample configuration scenario is provided for each variation.

1. In the left navigation, click

Advanced Setup

WAN Service

. The following page appears, showing any services already

configured.

Summary of Contents for SR516ac


























































































































































Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands

SmartRG SR516ac, User Manual

Search results

Summary of Contents for SR516ac

Reviews:

Related manuals for SR516ac

Brands by name

Popular brands