SmartRG SR516ac User Manual Download Page 30

Page: 30 / 158

3. Click

Next

. The following page appears.

4. In the

WAN Service Type

field, accept the default of

PPP over Ethernet (PPPoE)

5. (

Optional

) Modify the other fields, using the information in the following table.

Field Name

Description

Enter Service Descrip-

tion

(

Optional

) Enter a name to describe this configuration.

Enter 802.1P Priority

Enter the priority for this service. Options are

. The default is

For tagged service, enter values in this field and the

802.1Q VLAN ID

field.

For untagged service, accept the defaults of

-1

(disabled) in this field and the

802.1Q VLAN ID

field.

Enter 802.1Q VLAN ID

Enter the VLAN ID for this service. Options are

4094

. The default is

-1

(disabled).

For tagged service, enter values in this field and the

802.1P Priority

field.

For untagged service, accept the defaults of

-1

(disabled) in this field and the

802.1P Priority

field.

Summary of Contents for SR516ac


























































































































































Search results

Summary of Contents for SR516ac

Reviews:

SmartRG SR516ac, User Manual, Page: 30 / 158

Search results

Summary of Contents for SR516ac

Reviews: