SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
76
Field Name
Description
Filter Name
Enter a descriptive name for this filter. No special characters or spaces are allowed.
IP Version
For the filter to be configured and effective for IPV6, the gateway must be installed on a network that
is either a pure IPV6 network (with that protocol enabled) or is both IPV4 and IPV6 dual protocol
enabled/configured. Options are
IPv4
and
IPv6
. The default is
IPv4
.
If you select
IPV6
,
Source IP address
and
Destination IP address
must be specified in IPV6 format,
i.e., an IPV6-compliant, hexadecimal address such as: 2001:0DB8:AC10:FE01:0000:0000:0000:0001.
Protocol
Select the protocol to be associated with this incoming filter. Options are
TCP/UDP
,
TCP
,
UDP
, or
ICMP
.
Source IP address [/pre-
fix length]
Enter the source IP address for this filter. For IPv6, enter the prefix as well.
Source Port (port or
port:port)
Enter a source port number or range (
xxxxx
:
yyyyy
).
Destination IP address
[/prefix length]
Enter the destination IP address for this filter. For IPv6, enter the prefix as well.
Destination Port (port or
port:port)
Enter destination port number or range (
xxxxx
:
yyyyy
).
WAN Interfaces
Click to apply this rule to all WAN interfaces or only certain types. Options are
Select All
or select
any of the types defined for your network. The default is
Select All
.
MAC Filtering
On this page, you can manage MAC filtering for your gateway.
Your gateway can block or forward packets based on the originating device. This MAC filtering feature is available only in Bridge
mode. For other modes, similar functionality is available via IP Filtering.
