SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
73
1. In the left navigation bar, click
Advanced Setup
>
NAT
>
Multi NAT
and then click
Add
. The following page appears.
2. Modify the fields as needed, using the information in the table below.
Field
Description
Rule Type
Select the type of rule. Options are
One to One
,
One to Many
,
Many to One
, and
Many to Many
.
Use Interface
Select the interface to which this rule will apply.
internalAddrStart
Enter the starting address for the internal server.
internalAddrEnd
Enter the ending address for the internal server.
externalAddrStart
Enter the starting address for the external server.
externalAddrEnd
Enter the ending address for the external server.
3. Click
Apply/Save
to save and apply the settings. The server or servers for the selected service appear on the MultiNat
table page.
Security
In this section, you can configure the incoming and outgoing IP filtering and MAC filtering.
IP Filtering - Outgoing
On this page, you can add an outgoing filter and prevent certain data being transferred from the LAN to the WAN.
You can define up to 32 outgoing IP filters.
