Slant/Fin VGH-299-CH, Installation And Service Manual

Page: 68 / 128

E93.1601EN032.C VGH installation manual 68
Error Log
Error Log
Filter Error Type
Clear Error Log
Disabled
(Sub) Menu item Description
Error Log Show the error log (based on the selected filter options)
Filter Error Type Filter errors based on the Error Type (Lockout/Blocking)
Filter Boiler ID (Cascade System only) Filter errors based on Boiler ID (Managing, Dep 1, Dep2, etc.)
Clear Error Log Clear the error log (protected by password)
When no filtering option is selected (Disabled) the error log will show all errors for that category. So, if both filters
are disabled, the error log will show all the errors in the log.
Error Log
A014 (14) Lockout
Air Switch Not Closed
Wed 04-11-2018 14:50 1/32
▼
The error log screen will show on the first line: Boiler ID for which boiler the error was detected (cascade system
only), Error Code, (internal) Error Number, Error Type (Lockout/Blocking).
The second line will show the Error Description.
The bottom line will show the Time Stamp (date and time) when the error was detected (in the format as configured
in the Date Time Settings menu), and also the selected error index from the total number of errors in the (filtered)
error log. Only Time Stamp, Code and Description is displayed.
Example, see picture 12.13 above.
A014 = Error code.
(14) = Error Number (tracking number, 1-15 errors are stored maximum).
Lockout = Error type.
Air Switch Not Closed = Error description.
Wed 04-11-2018 14:50 = Time stamp when the error occurred.
Service reminder
The Service reminder will remind the owner/user of the appliance to service the appliance at a specified
"Service_Interval", factory set on 2000 burn hours. When service is not done within this time, a service reminder
will be shown on the screen:
" Service is required!", alternating with the normal status display.
NOTE: with the message "Service is required" the boiler keeps running, but maintenance must be done before
resetting this message.
12.5.1 S
ERVICE OVERDUE LOGGING
Menu/ Information/ Service/ Service history.
When the Service reminder has become active, the time (in hours) it takes before service is actually done is being
logged. This time is called the Service Overdue Time.
A maximum of 15 service moments can be logged by the system. When the log is full it will overwrite the oldest
log entry. Each time the Service reminder is reset, a new service moment is logged (counted) and the Service
Overdue counter will be stored in the log/history.
12.5.2 R
ESET THE SERVICE REMINDER
It is possible to reset the Service reminder counters before the Service reminder was actually active. This must
be done when the appliance was serviced before the Service reminder was active.
This means an overdue counter of 0 hours will be stored on the log (which makes sense because the service
was not overdue but ahead of schedule).
Picture 12.12
Table 12. 5
Picture 12.13