E_MH_Instalation_instructions_Skylux_Climax_Panorama
20/11/2020
14/60
Measuring your Climax saddle roof
3
H
M
H
G
D
D
L
D
R
H
h’
O
2
D
O
1
P
1
P
2
C
2
C
1
3 m
4 m
5 m
B
20 mm 300
mm
300 mm
95 mm
95 mm
P
2
100 mm
100 mm
P
1
Embedding the Climax post and the Climax base plate PV.
- Select point O1.
- Determine O2. The O1 - O2 distance = conservatory depth “D”.
- Draw a chalk line using the 3/4/5 rule and determine point P1.
The O1 - P1 distance is the width = B
(See item 3 below.)
- Repeat the same calculations for P2.
- Measure the distance (P1 - P2), which must be equal to (O1 -
O2) as an additional check.
- The base plate can be slid through the slotted holes in order
to position the base plate properly.
- The U for the base plate can be moved 20 mm either way to
allow proper adjustment.
The 3/4/5 rule.
- Determine the auxiliary point C1 based on O1 at a distance
of 4 metres
- Use a 3 metre string and a piece of chalk to draw a circle from
point O1.
- Use a 5 metre string to draw a circle from point C1.
- The 2 circles intersect at C2.
- The O1 - C2 line is at a right angle to the wall
(line C1-O1).
The difference in height H and depth D for the saddle roof.
HM = Height between the floor and the bottom side of the
ridge to wall bottom MB measured at the back against
the wall.
HG = Installation height of the bottom side of gutter.
This is also the height for the windows or the length
of the posts.
H = HM - HG
h’ = Saddle roof wall profile height.
1
2
D
