Ski-Doo REV-XR 2009, Operator'S Manual, Page: 69 / 151

OPERATING INSTRUCTIONS
Attach one end of emergency rope to
rewind handle.
NOTE: The spark plug socket can be
used as an emergency handle.
mmo2008-005-007
Attach the other end of emergency
rope to the starter clip supplied in the
tool kit.
mmo2008-005-009
Hook up clip on drive pulley.
mmo2008-005-012_a
1. Clip installation location
Wind the rope tightly around drive pul-
ley. When pulled, pulley must rotate
counterclockwise.
mmo2008-005-014_a
Pull the rope using a sharp, crisp pull so
the rope comes free of the drive pulley.
Start engine as per usual manual start-
ing.
WARNING
When starting the snowmobile
in an emergency situation, using
drive pulley, do not reinstall the
belt guard and return slowly to
have snowmobile repaired.
Vehicle Warm-Up
Before every ride, vehicle has to be
warmed up as follows:
Engage parking brake.
Snowmobile must be securely sup-
ported by the rear bumper using a
wide-base snowmobile mechanical
stand. Track must be 100 mm (4 in) off
the ground.
Attach tether cord to operator's cloth-
ing eyelet.
Start engine and allow it to warm up
two or three minutes at idle speed.
NOTE: It is not recommended to let
engine running at idle speed for more
than 10 minutes.
Disengage parking brake.
_______________
67