Ski-Doo REV-XR 2009, Operator'S Manual

Page: 64 / 151

CONTROLS/INSTRUMENTS/EQUIPMENT
Adjust heating intensity as shown.
mmo2009-005-010_a
1. Off
2. Warm
3. Hot
25) Heated Seats Switches
GTX SE Model
The GTX SE model is equipped with
heated driver and passenger seats.
The front seat switch is located on the
console to the right of the steering col-
umn.
The rear seat switch is located on the
LH handhold.
mmo2009-005-019_a
REAR SEAT SWITCH SHOWN
1. Heated seat
2. OFF
3. Warm
4. Hot
26) Electric Visor Jack
Connectors
GSX and GTX Models
An electric visor can be connected to
the jack connector. Electric current is
supplied whenever engine is running
on the 1200 4-TEC models and from
1900 RPM on the E-TEC model. A
stress relief extension is supplied with
the vehicle.
On GTX models, a visor jack connector
and a heating boots jack connector is
installed at rear on the LH handhold.
27) 12-Volt Power Outlet
GTX and GSX Models
A 12-volt electric appliance may be
connected to that jack connector. Elec-
tric current is supplied whenever en-
gine is running on the 1200 4-TEC mod-
els and from 1900 RPM on the E-TEC
model.
NOTICE
The 12-volt power outlet
is not designed to supply current of
more than 1 ampere.
28) C-Type Hitch
Renegade X and GTX SE
(European Models Only)
Use this hitch in conjunction with a tow
bar to tow an accessory.
NOTE: Refer to decal on vehicle for
towing weight capacities.
WARNING
Never tow an accessory with a
rope. Always use a rigid tow bar.
Using a rope would result in a col-
lision between the object and the
snowmobile and possibly in a tip
over in case of a rapid deceleration
or on a downward slope.
62
______________