Ski-Doo REV-XR 2009, Operator'S Manual, Page: 109 / 151

MAINTENANCE PROCEDURES
mmo2009-005-026_a
1. Taillight cover
2. Remove the screws retaining the
taillight housing.
mmo2009-005-023_a
1. Taillight housing retaining screws
3. To remove the socket from the tail-
light housing, turn the socket coun-
terclockwise then pull it out.
Body
Hood
WARNING
Never operate engine with hood
removed from vehicle.
Hood Removal
1. Pull up the rear end of the hood on
both sides.
2. Lift the rear end if the hood until it
disengages from the bottom pan.
mmo2009-005-025_a
Step 1: Pull up
Step 2: Lift
Hood Installation
1. Engage the tabs located at front of
the hood into the slots on the bot-
tom pan cover.
2. Lower the rear end of the hood and
press down on both sides to lock it
in place.
Side Panels
WARNING
Never operate engine with side
panels opened or removed from
vehicle.
To open a side panel, stretch and un-
hook the latches.
mmo2009-005-029_a
TYPICAL
1. Latches
______________
107