Ski-Doo REV-XR 2009, Operator'S Manual

Page: 95 / 151

MAINTENANCE PROCEDURES
mmo2008-003-063_a
1. Retaining pin
Drive Belt
Drive Belt Inspection
Inspect belt for cracks, fraying or ab-
normal wear (uneven wear, wear on
one side, missing cogs, cracked fab-
ric). If abnormal wear is noted, prob-
able cause could be pulley misalign-
ment, excessive RPM with frozen
track, fast starts without warm-up pe-
riod, burred or rusty sheave, oil on belt
or distorted spare belt. Contact an au-
thorized SKI-DOO dealer.
Drive Belt Replacement and
Adjustment (Ring Type Adjuster)
Drive Belt Removal
Remove DESS key from post.
1. Open LH side panel, refer to BODY .
2. Remove belt guard, refer to DRIVE
BELT GUARD REMOVAL
.
3. To open the driven pulley and re-
move the drive belt, loosen the lock
nut inside the driven pulley adjust-
ment ring (do not remove the lock
nut).
mmr2008-042-003_a
DRIVEN PULLEY - RING TYPE
1. Lock nut
2. Adjustment ring
To loosen the lock nut, use the follow-
ing tools from the tool kit.
mmo2008-003-039
SCREWDRIVER PIN
mmo2008-003-040
WRENCH SOCKET 16/18 MM
Insert the screwdriver pin into the
16 mm wrench socket.
mmo2008-003-041_a
1. 16 mm end
2. 18 mm end
3. Screwdriver pin
4. Insert and set the 18 mm socket
end in the lock nut.
_______________
93