Ski-Doo REV-XR 2009, Operator'S Manual, Page: 110 / 151

MAINTENANCE PROCEDURES
To remove a side panel, proceed as
follows: Free the lower hinge from its
slot, then free the upper hinge by low-
ering the panel.
1. Open the side panel.
2. Lift up the side panel and free the
lower hinge from its slot.
3. Free the upper hinge from its slot
by lowering the side panel.
Vehicle Cleaning and Protection
Remove any dirt or rust.
To clean the entire vehicle, use only
flannel cloths or equivalent.
NOTICE
It is necessary to use flan-
nel cloths or equivalent on wind-
shield and hood to avoid damaging
further surfaces to clean.
To remove grease, oil and grime, use
Heavy duty cleaner (P/N 293 110 001)
(spray can 400 g) and (P/N 293 110 002)
(4 L).
NOTICE
Do not use Heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all plastic
and vinyl surfaces, use Vinyl & Plastic
Cleaner ((P/N 413 711 200) (6 x 1 L)).
To remove scratches on windshield
or hood use the Scratch Remover Kit
(P/N 861 774 800).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace-
tone, products containing chlorine,
etc.
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only.
108
______________