Ski-Doo REV-XR 2009, Operator'S Manual

Page: 26 / 151

TRACTION ENHANCING PRODUCTS
potential hazards, that could cause the
engine to overheat and be severely
damaged.
WARNING
If tunnel protectors are excessively
worn or not installed, the gas tank
could be punctured, causing a fire.
NOTICE
Ask your dealer for the
appropriate tunnel protectors mod-
el and kit number required for your
snowmobile.
NOTE: Consult the BRP limited war-
ranty to find out what warranty limita-
tions are related to the use of studs.
Installation of Studs
WARNING
Never stud a track that has not
been approved for studs.
Ap-
proved tracks can be identified by
a stud symbol (see illustration be-
low) molded into the track surface.
Installing studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or death.
A00A8KA
1 2
TRACK SYMBOLS
1. Approved
2. NOT Approved
To ensure safe and proper installation,
BRP recommends to have the studs in-
stalled by your dealer.
– Use only the BRP approved special
studs.
– Never use studs that exceed the
height of your snowmobile’s track
profile by more than 9.5 mm (3/8 in).
2
A33A32A
3
1
4
INSTALLATION OF STUDS
1. Stud size
2. Penetration range 6.4 to 9.5 mm
(1/4 to 3/8 in)
3. Track lug height
4. Track belt thickness
WARNING
– See an authorized SKI-DOO
dealer for current specific stud-
ding availability and applica-
tions.
– Always consult the traction
product manufacturer’s instal-
lation instructions and recom-
mendations before having your
dealer install studs and runners.
24
_______
SAFETY INFORMATION
________