Ski-Doo REV-XR 2009, Operator'S Manual, Page: 60 / 151

CONTROLS/INSTRUMENTS/EQUIPMENT
mmo2009-005-012_a
1. Rear seat
2. Accessories connector
4. Disconnect the accessories con-
nector and remove seat.
Passenger Seat Installation
To install the passenger seat, proceed
as follows:
1. Put the passenger seat behind the
driver's seat. Let enough space be-
tween the seats to connect the ac-
cessories connector.
2. Slightly incline the passenger seat
towards front and engage seat
hooks in the tunnel slots located
behind the driver's seat.
mmo2009-005-013 _a
1. Driver's seat
2. Tunnel slot
3. Push the front portion of the pas-
senger seat towards the driver's
seat and firmly push the rear por-
tion down to lock the passenger
seat in position.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
WARNING
Make sure seat is securely latched
before riding.
17) Passengers Handholds
GTX Models
Adjustable and heated handholds
mounted at rear on GTX models.
To adjust the handhold height, proceed
as follows:
1. Pull up the knob to release tension.
2. Raise or lower the handhold to suit
passenger's comfort.
mmo2009-005-009_a
Step 1: Pull knob
Step 2: Adjust height
3. Press knob down to lock the hand-
hold in position.
NOTE: The locking pressure applied
on the handhold can be adjusted by
screwing knob in or out when released.
18) Mountain Strap
Renegade Models
Mountain strap provides a grip for driv-
er when side-hilling.
58
______________