Ski-Doo REV-XR 2009, Operator'S Manual

Page: 131 / 151

MONITORING SYSTEM
PILOT
LAMP(S)
ON
BEEPER
MESSAGE
DISPLAY (1)
DESCRIPTION
2 short
beeps
—
Good key, vehicle ready to operate.
2 short
beeps,
repeating
slowly
CHECK KEY
Unable to read key (bad connection). Make
sure the key is clean and correctly snapped
on post.
DESS
Short
beeps
repeating
rapidly
BAD KEY
Invalid key or key not programmed. Use the
proper key for the vehicle or have the pro-
grammed.
— —-
THROTTLE OPEN
Throttle applied while attempting an engine
start (engine cranks but won't run). Release
throttle while starting.
— —
DROWN MODE
Throttle wide open while attempting an en-
gine start (engine cranks but won't run). Re-
lease throttle while starting.
(1) 50 th anniversary, X and Limited package only.
How to Read Fault Codes
Multifunction Analog/Digital Display Only
Press and hold MODE (M) Button and simultaneously depress the HI/LOW beam
switch repeatedly several times.
If two or more codes are registered, use SET (S) or MODE (M) to scroll.
To exit the fault codes mode, press and hold MODE (M) Button.
Contact an authorized SKI-DOO dealer for code signification.
______________
129