Protection
Protection Module Configuration with IMx-M Manager
2 - 126
SKF Multilog On-Line System IMx-M
User Manual
Configuring Digital Channels
To configure a digital channel, from the configuration hierarchy, select
Digital Channels
and then either double-click on or select one from the displayed eight channels and
press the
Edit
button (see figure below).
Figure 2 - 92.
List of Digital Channels.
This will launch the digital channel setup dialog as shown in the figure below:
Figure 2 - 93.
Configuring a Digital Channel.
Speed
enables the selected digital channel as a
Latching Alarms Reset
is used as the acknowledgment of a latching sensor fault
on slot wise. It will bring the
sensor OK
status slot wise back to normal if the
