SKF Multilog On-Line System IMx-M, User Manual

Page: 104 / 313

Protection
IMx-M Manager
2 - 84 SKF Multilog On-Line System IMx-M
User Manual

Right click on the slot and select Copy From ... then File ... . Select the file that was
created by Get PRM Config from device.

Perform Save .
Export to Excel File
The IMx-M Manager allows configurations to be exported as a Microsoft Excel
Workbook from plant, area, rack and slot nodes.
These workbook configurations can used as reference.
An advantage of this feature is that it allows these levels of the configuration to be
exported in a readable format for reference and use by external bodies.
A workbook can be created and exported from the plant, area or rack levels of the
configuration hierarchy, with each created workbook containing all child elements of the
selected hierarchy node (see figure below).
Figure 2 - 58.
Exporting a Configuration File as an Excel Workbook.
The created workbook will contain the following worksheets:

Analog Channels : contains the full parameter set of all enabled analog channels.

Combined Measurements : contains the full parameter set of all combines
channels.

Digital Channels : contains the full parameter set of all enabled digital channels.

4-20 mA out : contains the full parameter set of all enabled 4
–
20 mA.

Relays : contains the full parameter set of all relay module configurations.

Notes : information on engineering unit and all rack\slot worksheet settings.
Note that the created workbook will not include CMM properties, Modbus configuration,
PSU configuration, Slot names and system configuration of empty slots and relays.