SKF Multilog On-Line System IMx-M
Index - 1
User Manual
Index i
4
4-20 mA output 4-25
4-20 mA output voltage selection 4-25
A
absolute shaft vibration 2-5
analog channel configuration 2-103
analog channels 1-6
analog inputs 4-14, 7-2
analog measurement 7-3
B
backplane 7-1
buffered outputs 4-23
front panel BNC buffered outputs 4-23
rear buffered outputs 4-23
C
cabinet 4-2
casing vibration 2-6
channel disarm 2-56
channel settings 2-103
circuit fault diagnostic command 2-37, 2-42, 2-
46
I/O card circuit faults 2-37
relay card circuit faults 2-42
triggered bits of combined conditions 2-46
CM part 1-6, 2-194, 3-1, 4-13, 4-14, 4-19, 4-
37, 7-2, 7-4, 7-5
analog inputs 4-14, 7-2
analog measurement 7-4
diagnostic commands 4-37
digital inputs 4-19, 7-2
digital measurement 7-5
electrical interface 4-13
IMx-M time 3-1
interface 7-5
Modbus (L3) 2-194
signal processing 7-5
USB port 4-37
CMM
buffer storage capacity 1-8
serial (USB) interface 4-27
communication cable 4-13
cable type 4-13
Ethernet cable 4-13
complementary differential expansion (CDE) 2-7
component check 6-3
configure IMx-M 2-124, 2-129
analog channels 2-103
digital channels 2-124
relays 2-129
connections 7-18
relay card 7-18
cooling 4-3
CPU card 4-31, 7-12, 7-22
DIP switches and jumpers 7-22
drawing 7-12
LEDs 4-31
CPU/IO pair 1-6
D
daisy chain 4-13
data communication 4-13
digital channel configuration 2-124
digital inputs 4-19, 7-2
digital measurement 7-3, 7-5
dimensions 7-1
DIP switch settings 4-13, 4-14, 4-19
analog inputs 4-14
digital inputs 4-19
disarm 2-56, 2-57, 2-58
channel disarm 2-56
release of system/slot disarm 2-58
slot disarm 2-57
system disarm 2-58
dismounting 4-2
drawings 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 7-
13, 7-21, 7-22
channels and DIP switches on I/O card 7-21
CPU card 7-12
DIP switches and jumpers on CPU card 7-22
front panel 7-8
I/O card 7-13
power supply unit 7-10
rack 7-7
rear panel 7-9
relay card 7-11