SKF Multilog On-Line System IMx-M, User Manual, Page: 140 / 313

Protection
Protection Module Configuration with IMx-M Manager
2 - 120 SKF Multilog On-Line System IMx-M
User Manual
Identification
Figure 2 - 89.
Combined Measurement Identification - List of Types.
Type: Currently permitted combined measurement types are the following:
Absolute Shaft Vibration can be applied to all combined measurements 1
through 8. For detailed information refer to the measurement type Absolute
Shaft Vibration and the configuration example of a Absolute shaft vibration .
Piston Rod Drop XY (Average Mode) can be applied to all combined
measurements 1 through 8. For detailed information refer to the
measurement type
Piston Rod Drop and the configuration example of a Piston
rod drop .
Piston Rod Drop XY (Triggered Mode) can be applied to all combined
measurements 1 through 8. For detailed information refer to the
measurement type
Piston Rod Drop and the configuration example of a Piston
rod drop .
Complementary Differential Expansion can be applied to all combined
measurements 1 through 8. For detailed information refer to the
measurement type
Complementary differential expansion and the
configuration example of a Complementary differential expansion .
Temperature Difference can be applied to combined measurements 5, 6, 7
and 8. For detailed information refer to the measurement type Temperature .
Every type should be given a name and comment to assist in identifying the combined
measurement.
Name : A 20 character field which can usefully be used to identify the measurement
location, type and/or tag.
Comment : A free text field for additional information. Note that this text is only stored
in the project and not in the actual configuration.