59 62 134 D 3407
D 3407
.
208.01.10
.
02 07.2009
7
Sirona Dental Systems GmbH
1
Introduction
Operator’s Manual SIDEXIS XG
Components of the SIDEXIS XG system
båÖäáëÜ
1
Introduction
Explanation
This manual provides instructions and information on the use of the SIDEXIS
digital radiography and video system. It contains comprehensive instructions
on how to use the software, as well as an introduction to the exposure
technique and the possibilities of visualization and analysis of digital X-ray
and video exposures.
Important note
1.1
Components of the SIDEXIS XG system
General components
● PC with monitor, mouse, keyboard, connection cables, pre-installed
operating system software and manuals (when using a kit solution, this
type of PC is required)
● SIDEXIS XG software (already pre-installed on the PC or supplied on CD-
ROM) with manual
● Warranty passport
Intraoral X-ray components
● Wall-mounted X-ray box for image acquisition
● PC slide-in module for image acquisition
● USB X-ray box
● Two X-ray sensors: Full Size and Universal, each with disk and hygiene
protection sleeves
● Holder set from RINN
Panoramic and Ceph X-ray components
● The following panoramic X-ray units:
- ORTHOPHOS Plus DS
- ORTHOPHOS Plus DS Ceph
- ORTHOPHOS 3 DS,
- ORTHOPHOS XG
Plus
DS
- ORTHOPHOS XG
Plus
DS Ceph
3D X-ray
● GALILEOS
● GALILEOS GAX 5
Video components
● SIROCAM video camera with foot switch and hygienic protective sleeves
● Optional video camera for extraoral exposures (full-face camera)
● Video acquisition / frame grabber card including software (installed in PC)
NOTICE
Make sure that all national requirements are observed when using
SIDEXIS XG,
for example, the German X-Ray Ordinance (RöV) (see section “Constancy
NOTICE
Please refer to the pertinent manuals for a detailed description of the
individual hardware components as well as of the entire system.
