59 62 134 D 3407
132
D 3407
.
208.01.10
.
02 07.2009
4 Special functions
Sirona Dental Systems GmbH
Constancy test
Operator’s Manual SIDEXIS XG
3. The relocation procedure
Relocation of data can take some time. Its progress may be monitored in a
dialog box. Relocation can be ended at any time by clicking the
"Cancel"
button. There may be a short delay until the function is terminated as it must
first finish processing the current image. If you stop a relocation in progress,
you can continue it at a later time by specifying the same date(s).
4.3.3
Opening relocated images
General
Since all information relevant for image selection (image type, image date,
short description and preview) remain on the hard disk and only the (space
intensive) images as such are relocated, the later selection of relocated
images does not differ from the selection of those not yet relocated.
Supplement: Exchangeable external data
media
When using exchangeable external data media, then you are requested to
insert the respective data media.
After the storage medium is inserted and this message is confirmed, the
image can be displayed as usual. Retrieval and display of the desired image
are automatic.
4.4
Constancy test
Explanation
According to German legal regulations, the exposure quality of an X-ray
system must be checked for constancy at certain time intervals.
During the installation of SIDEXIS and at every modification to the existing X-
ray equipment, the service engineer stores information on the current X-ray
system in SIDEXIS.
Scope
This function applies only to digital X-ray technology.
CAUTION
Do not remove the storage medium from the drive during relocation.
Otherwise data loss may occur.
CAUTION
For clarity, the relocated image is identified with a "»" in the dialog box list
"
"Select image"
.
