59 62 134 D 3407
78
D 3407
.
208.01.10
.
02 07.2009
3 Operation
Sirona Dental Systems GmbH
Image acquisition
Operator’s Manual SIDEXIS XG
3.6.3.5
Operation with several intraoral X-ray units
If several X-ray units are installed and networked in a practice, then an X-ray
acquisition unit must be selected before taking an intraoral X-ray exposure.
The selection is made by clicking the desired unit in the
"Status / Name"
column and it is highlighted by a blue bar.
Selection dialog box
Acquisition units marked with a question mark are possibly not switched on.
Acquisition units which are crossed out are possibly busy.
After the X-ray acquisition unit has been selected, further dialog boxes show
how the connection between the acquisition unit and the calling computer is
established. These dialog boxes can provide important information in case of
connection errors.
3.6.3.6
Image acquisition
Explanation
As soon as the message
"Waiting for X-ray"
appears, the X-ray unit is enabled
by the computer. You can now release the exposure at the unit.
After further messages the following dialog box which informs you about the
progress of the data transfer operation finally appears. Note that the
"Quit"
button is now unavailable for safety reasons.
