59 62 134 D 3407
D 3407
.
208.01.10
.
02 07.2009
73
Sirona Dental Systems GmbH
3
Operation
Operator’s Manual SIDEXIS XG
Image management
båÖäáëÜ
Validity
This function can be used for X-ray and video images (but not for live and still
images).
This function applies only to the active image.
The WYSIWYG principle applies here. The images are always exported in the
condition at the time the command is selected. That is, all processing steps
(rotating, filtering, brightness and contrast adjustment) are also exported.
However, this applies only to entire images. Magnified image details are not
exported.
Activating the function
➢ Click the button.
or
➢ From the menu bar
"[I]mage"
, select the menu item
"Send ima[g]e"
.
Function
If only a single addressee has been configured, then the image is sent without
further queries immediately after giving the command, and the corresponding
program opens simultaneously.
If several programs are interfaced to SIDEXIS in this way, then you select the
desired target application in a dialog box.
3.5.16
Move image
Explanation
This command makes it possible to move images that were created for the
wrong patient to another patient.
● Image movements are recorded and can be undone by moving the
images once again.
● Saved views are also moved in this process.
● If an image is moved that is part of one or more examinations, then the link
to the moved image remains intact in the examinations.
- However, the image will no longer be displayed in the affected
examinations.
- If the image is moved back to the original location, then it will be
displayed once again in the affected examinations.
● If the image of a 3D volume exposure is moved, then the entire 3D volume
will be moved with all of the 2D images generated for it.
Scope
This function can be applied to all saved images.
This function applies only to the active image.
NOTICE
Entries in the optional X-ray control book are not moved!
These are to be corrected subsequently using comments.
NOTICE
If an image is moved, then the procedure is logged in the PDATA/-
sibdel.log file.
