Cable layout and connections
57
851-164336 / D
7.2 System cabling
Cable layout
Cables are identified according to individual cable numbers and
drawing numbers listed on the cable plan and in the cable overview
table.
→
The cable plan is shown on page 58.
→
The cable specifications are provided on page 59.
Cable information includes:
•
Required specifications
•
Equipment they are connected to
•
Corresponding terminations
System and shipyard cables
Cables fall into two categories:
•
Cables supplied by Simrad with the standard SP70 system
delivery. These cables are marked on the cable plan with an
asterisk (*).
•
Cables provided by the shipyard performing the installation or
the shipowner.
System cables
Most system cables in the standard delivery are supplied by
Simrad. Cables to be provided by the installation shipyard are
specified in the cable specifications.
Shipyard cables
The cable specifications provided are the
minimum acceptable
.
Detailed cable information is provided for the:
•
Connections at each end (including reference to the
corresponding: system unit, terminal board identification and
plug/socket to be used).
•
Number of cores
•
Recommended type
•
Minimum specifications
Simrad accepts no responsibility for damage to the system or
reduced operational performance caused by improper wiring.
Summary of Contents for Simrad SP70
