Simrad Simrad SP70, Installation Manual

Page: 30 / 230

Simrad SP70
14
851-164336 / D
Heavy units may be equipped with lifting lugs for transportation
by crane within the workshop or installation area. Before a crane
is used, check:
•
The applicable weight certificate for the crane.
•
The security of the lifting lugs.
Ensure that all available lifting lugs are used. Ensure the unit
remains under control during the operation to avoid damage to the
unit, equipment or personnel.
Heavy units may be transported using a fork-lift truck. Special
attention must then be paid to the position of the unit’s centre of
gravity. The units must be properly secured to the truck.
Initial preservation
Introduction
When a system, a unit or a spare part has been delivered to the
customer, it may be subject to long-time storage prior to
installation and use. During this storage period, certain
specifications must be met.
The equipment must be preserved and stored in such a way that it
does not constitute any danger to health, environment or personal
injury.
Specific specifications are presented below.
→
For further information about storage, refer to page 18.
→
For further information about re-packing, refer to page 20.
→
For further information about temperature protection, refer to
page 22.
Original packing crate
1 The equipment must be stored in its original transportation
crate.
2 Ensure that the units are clearly separated in the shelves and
that each unit is easily identifiable.
3 The crate must not be used for any purpose for which it was
not intended (eg. work platform etc.).
4 The crates must not be placed on top of each other, unless
specific markings permit this.
5 The crates must not be placed directly on a dirt floor.
6 Do not open the crate for inspection unless special
circumstances permit so.