Simplex 4100ES-S1, Programming Manual

Page: 8 / 118

4100ES-S1 Programming Guide Document: LT0400
Introduction
1-2
1.1 About this Manual
This manual provides information for creating and maintaining configuration files that contain
site-specific information for SIMPLEX 4100ES-S1 installations, based on standardized
templates.
This manual does not cover physical installation of hardware items. Refer to LT0394
4100ES-S1 Installation and Maintenance Manual for details about this.
This manual does not cover configuration of networked 4100ES-S1 systems. Contact your
local SIMPLEX representative for assistance with this.
The manual is divided into the following chapters:
Chapter 2 describes the 4100ES-S1 system hardware and how this affects the
configuration procedure.
Chapter 3 describes the 4100ES-S1 programming tools used for creating and
updating the configuration for a 4100ES-S1.
Chapter 4 details the procedure for creating a configuration file for a new 4100ES-S1
installation, using the configuration templates.
Chapter 5 describes how to add addressable devices to the configuration for the in-
built IDNet loop.
Chapter 6 details the configuration settings for addressable devices and how these
affect the operation of the devices.
Chapter 7 describes how to add zone display modules for more zones to the
configuration. This is for when an existing system is being extended to have more
zones.
Chapter 8 describes how to add expansion modules such as a second IDNet loop to
the configuration. This will apply to a new system which has additional modules over
the basic 4100ES-S1, or to an existing 4100ES-S1 installation that is being extended.
Chapter 9 describes how Custom Control equations are written and entered. Some
examples are given.
Chapter 10 describes how to configure the panel to control AS1668 Fans.
Chapter 11 describes how to build the configuration and use the IP File Transfer
utility to download this and other files to the panel.
Chapter 12 contains appendices which describe how AS4428.1 operation is
produced in 4100ES-S1 using Custom Control equations. This is for reference only,
and is not required reading for normal configuration work.
Appendix A
– a general description of AS4428.1 requirements.
Appendix B
– describes the allocation of internal system resources and Custom
Control for system-wide functions.