User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-N16
format in the Slave device),
◦
in
First register
parameter write
1h
,
◦
in
Last register
parameter write
2h
,
◦
create next block by pressing
'+'
sign,
◦
Block type
parameter set as
write HOLDING reg.
,
◦
Register size
parameter set as
16-bit registers
(according to register
format in the Slave device),
◦
in
First register
parameter write
4h
,
◦
in
Last register
parameter write
4h
,
◦
create next block by pressing
'+'
sign,
◦
Block type
parameters set as
write HOLDING reg.
,
◦
Register size
parameter set as
16-bit registers
(according to register
format in the Slave device),
◦
in
First register
parameter write
8h
,
◦
in
Last register
parameter write
8h
,
•
move to the
Device templates
parameter block and press
the
Save device template
button,
◦
in the
Save device template
menu, enter the template name, e.g.
Write do device
(the stored template can be used to configure the device
to a different address).
7.16.
NETWORK AND REMOTE DISPLAY SETTINGS
This button is visible only for a device equipped with the any hardware
communication configuration in block D.
Network settings
allows the user to configure the network settings by downloading and
visualizing the data from the device through the Ethernet connection.
Remote display
settings allow the user to configure the MultiCon and to display any data with an external PC.
The parameters of the
Network settings
menu are:
–
DHCP
(Dynamic Host Configuration Protocol) - allows a device to be configured
automatically, eliminating the need for intervention by a network administrator,
245
i
Device configuration
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
E-mail notifications
Network settings
