www.silverlinetools.com
5
26A Battery Charger 12/24V
178555
d)
Store idle devices out of the reach of children and do not allow
persons unfamiliar with the device or these instructions to operate
it.
Electrical devices may be dangerous in the hands of untrained users.
e)
Maintain electrical devices. Check for defects of parts and any
other condition that may affect the device’s operation. If damaged,
have the device repaired before use.
Many accidents are caused by
poorly maintained electrical devices.
f)
Use the device and its accessories in accordance with these
instructions, taking into account the conditions and the task to
be performed.
Use of the device for operations different from those
intended could result in a hazardous situation.
Service
a)
Have your electrical devices serviced by a qualified repair person
using only identical replacement parts.
This will ensure that the
safety of the device is maintained.
Battery Charger Safety
WARNING:
Be aware that lead-acid batteries emit flammable, explosive
gases during charging and engine cranking. Do not charge batteries close
to any kind of ignition, sparks, open flames or heat source. Do not smoke.
If you smell gas at any time during battery charging DO NOT disconnect
clamps instead ensure windows or doors are open to allow maximum
ventilation. When gas has cleared, disconnect charger from the mains
power supply.
• Always refer to battery manufacturer’s guidance before charging a
battery
• DO NOT allow solvents such as paint thinner, petrol or detergents to
contact the battery case
• Unless the battery is of the 'maintenance-free' type, always check that
the electrolyte level is correct before attempting to charge
• Always check the battery type (AGM, gel etc.) and capacity (Ah) is
compatible with the battery charger
• Remove all metal jewellery before handling lead-acid batteries
• Always wear protective gloves and goggles when handling lead-acid
batteries
• To prevent sparking do not wear clothes made of synthetic fibre which
may hold a static charge
• Never use this charger to charge non-rechargeable batteries or other
batteries this charger is not designed to charge
• Use this battery charger in completely dry conditions
• Never attempt to charge a frozen battery
• Do not attempt to charge any battery that is leaking, cracked, or
otherwise damaged
• If the battery charger supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard
• Charge batteries in a well ventilated area with a continuous air flow,
such as open doors or windows
• Ensure that there is at least 600mm of clear space around the charger,
to allow adequate ventilation
• This battery charger is designed to charge one battery at a time
• Batteries should always be in a stable, upright, position during charging
• Position the charger as far from the battery as charging leads will allow
• Always handle battery terminal connectors at arm’s length
• Always disconnect power supply before making, or breaking, battery
terminal connections
• Do not allow any metal items to come into contact with the battery
terminals
• Do not allow positive and negative lead clamps to touch
General Safety
WARNING Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the device by a person responsible for
their safety.
Children must be supervised to ensure that they do not play
with the device.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
a)
Do not operate electrical devices in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Electrical
devices create sparks which may ignite the dust or fumes.
Electrical Safety
a)
Electrical plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
devices.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b)
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased risk
of electric shock if your body is earthed or grounded.
c)
Do not expose non-waterproof electrical devices to rain or wet
conditions. Do not submerge non-pressure-rated devices in water.
Water entering an electrical device will increase the risk of electric
shock.
d)
Do not abuse the power lead. Never use the lead for carrying,
pulling or unplugging the device. Keep lead away from heat, oil,
sharp edges or moving parts.
Damaged or entangled power leads
increase the risk of electric shock.
e)
If operating an electrical device in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use of an
RCD reduces the risk of electric shock.
Personal Safety
a)
Stay alert, watch what you are doing and use common sense
when operating an electrical device. Do not use potentially
dangerous electrical devices while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention
while operating potentially dangerous devices may result in serious
personal injury.
b)
Use personal protective equipment including eye protection where
appropriate.
Protective equipment used for appropriate conditions will
reduce personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to a power source.
Carrying electrical
devices with your finger on the switch or energising devices that have
the switch on invites accidents.
d)
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the device in unexpected situations.
Use and Care
a)
Do not force the device. Use the correct device for your
application.
The correct device will do the job better and safer at the
rate for which it was designed.
b)
Do not use the electrical device if the switch does not turn it
on and off.
Any device that cannot be controlled with the switch is
dangerous and must be repaired.
c)
Disconnect the power source before making any adjustments,
changing accessories, or storing electrical devices.
Such preventive
safety measures reduce the risk of starting the device accidentally.
178555_Z1MANPRO1.indd 5
23/09/2015 11:32
Summary of Contents for 178555
Page 2: ...2 1 2 3 4 5 6 7 8 9 10 11...
