Silex technology BR-500AC, User Manual

Page: 76 / 128

70
BR-500AC User's Manual
- The event log is saved into the "log" partition of flash memory.
- Each file is 200Kbyte, and only 1 rotated file is saved. (Total 2 files (400Kbyte) are saved.)
Note
Category Events Added information Description
Network Set IP Address IF Name, IP Address, Subnet
Mask IP address was configured.
Detect DHCPC Event IF Name, BOUND IP address was assigned by the DHCP Client.
IF Name, EXPIRE A lease period for DHCP Client was expired and the IP
address was invalidated.
IF Name, IPV4LL DHCP Client set a link-local address.
Set DNS Resolver DNS Primary,
DNS Secondary DNS Resolver setting was updated.
Wired Link Up IF Name, Link Speed BR-500AC connected to wired LAN.
Link Down IF Name BR-500AC disconnected from wired LAN.
Detect Device IF Name, Invalid, MAC address Unregistered devices were detected.
Single Client : Unregistered device (MAC address) was
detected on wired LAN.
Multi-Client : Device (MAC address) not registered to
the MAC address filter of IEEE802.1X authentication
was detected.
IF Name, Adopt, MAC address Single Client : BR-500AC set the registered or detected
MAC address of the wired LAN device to the bridge
interface.
IF Name, Store, MAC address,
IP address Multi-Client : BR-500AC set the detected MAC address
of the wired LAN device to the address table.
IF Name, Valid, MAC address,
IP address Wired device was detected.
I F N a m e , E x p i r e d , M A C
address, IP address Wired LAN device information was lost when Multi-
Client Mode is on.
Wireless
(STA) Link Up IF Name, SSID,
MAC address of AP,
802.11mode, Channel, Radio
Strength, Tx Rate BR-500AC connected to wireless LAN.
Link Down IF Name, MAC address of AP,
Reason Code BR-500AC disconnected from wireless LAN.
Deauthenticated IF Name, Reason Code Deauthenticated packet was received, and wireless
connection was disconnected.
Smart
Wireless
Setup Success Smart Wireless Setup finished successfully.
Overlapped Smart Wireless Setup failed since multiple APs were
detected.
Timeout AP was not detected during Smart Wireless Setup.