Silex technology BR-500AC, User Manual

Page: 15 / 128

2. About BR-500AC
9
- To use the functions above, your Access Point or wireless router needs to support the same functions.
- For details on the "AMC Manager®" , please visit our homepage.
- To use the "AMC Manager®", an IP address needs to be configured to the BR-500AC.
- BR-500AC can be used in Infrastructure mode only. Ad hoc mode is not supported.
Two types of operating mode
[Single Client Mode]
- Bridges a single non-wireless device connected to a LAN port of the BR-500AC over
wireless network.
- For the MAC address to use for wireless LAN connection, the MAC address of
the device connected to a LAN port of the BR-500AC will be used (MAC address
transparent feature).
- Stops bridging when someone changed the device being connected to a wired LAN
port of the BR-500AC to the other one (security feature).
[Multi-Client Mode]
- Up to 16 non-wireless devices can be bridged over wireless network if a HUB is
connected to a LAN port of the BR-500AC.
- For a MAC address to use for wireless LAN connection, the MAC address of the BR-
500AC's wireless module will be used.
Easy access to the Web configuration interface
Without changing the setting of the PC you use for setup, the Web configuration
interface of BR-500AC can easily be accessed.
Wireless Configuration Using a Push Switch
BR-500AC support the wireless configuration using Smart Wireless Setup. If your
wireless router (Access Point) supports WPS (Wi-Fi Protected Setup), you can configure
the wireless settings easily using the push switch.
Supports "AMC Manager® "(non-free program / free program)
BR-500AC supports the total management software, "AMC Manager®" .
The AMC Manager® provides the useful features as follows:
- Remote device control and monitoring
- Bulk configuration and firmware updates
- System time synchronization (version 3.2.0 or later)
Note