Silex technology BR-500AC, User Manual

Page: 125 / 128

A. Appendix
119
A LAN port error has occurred (POWER LED: Blinks rapidly (Red), WLAN LED: OFF, STATUS LED:
ON (Green) ).
The bridge feature may be aborted as the non-wireless device is unplugged and
changed to the other device on the LAN port.
Solution Restart the BR-500AC.
In
Single Client Mode
, if the non-wireless device is unplugged and changed
to the other device, BR-500AC will abort bridging of that device, taking such
occurrence as an error.
Also, when the MAC address filtering is used to restrict the devices to bridge, you
will need to change the setting registered to
Network Device Address
.
This error does not occur in
Multi-Client Mode
. The restart is not required then.
Several devices may have been connected to the BR-500AC using a HUB, though it is
operating in
Single Client Mode
.
Solution In
Single Client Mode
, connect only one device to the LAN port of BR-500AC. To
use several devices, use
Multi-Client Mode
.
I cannot access the non-wireless device connected to a LAN port of the BR-500AC.
The BR-500AC or non-wireless device may not be operating correctly.
Solution
Please check the LED status on BR-500AC. Please also check that the non-wireless
device is properly powered on.
The connection may be restricted by the MAC address filtering on BR-500AC.
Solution See the setting at
Network Device Address
to check that access of the
connected device is not restricted by the MAC address filtering.
16 or more non-wireless devices may be connected when BR-500AC is operating in
Multi-Client Mode .
Solution Check how many non-wireless devices are connected to BR-500AC.
Up to 16 non-wireless devices can be connected when BR-500AC is operating in
Multi-Client Mode
.
16 sets of combination information may be registered to the management table.
Solution When BR-500AC is operating in
Multi-Client Mode
and the address management
table feature is enabled, up to 16 sets of combination information are
automatically registered to the management table. As they are not deleted
automatically after registered, please manually delete unnecessary ones.