Silex technology BR-500AC, User Manual

Page: 45 / 128

4. How to Configure BR-500AC
39
4.
Press the WPS button on your Access Point.
Confirm that your Access Point is ready for a wireless connection to be made.
- The name, position and shape of the WPS button will differ depending on your Access Point.
For details, refer to the operation manual that came with your Access Point.
- Please use only one Access Point. If two or more Access Points are waiting for wireless connections, BR-
500AC will not be able to connect properly.
5.
Press and hold the push switch at the front of BR-500AC. The WLAN LED and STATUS LED
will start to blink green together.
In 5 seconds, the WLAN LED will continue to blink while the STATUS LED will turn off.
Release the push switch then.
Note
WPS
Access Point
Press the switch
Release the push switch
Push Switch
Confirm the STATUS LED
is OFF
Confirm these LEDs
are blinking
Push Switch
Keep holding
BR-500AC BR-500AC