Silex technology BR-500AC, User Manual

Page: 46 / 128

40
BR-500AC User's Manual
6.
The BR-500AC and the Access Point will start to communicate each other.
When the configuration finished successfully, the WLAN LED turns green and the
STATUS LED turns or blinks green.
- It may take a while to complete the wireless configuration depending on your environment.
- When wireless configuration has failed, the WLAN LED will flash rapidly.
In such a case, read the instructions carefully and start from
4
again.
Note
If you plan to use BR-500AC in
Single Client Mode
, you can keep using the connected
non-wireless device to use it wirelessly.
To replace it with the other non-wireless device, turn off the BR-500AC and replace the
connected non-wireless device to it. See
Connecting Non-wireless Devices
in the
next page for how to connect the BR-500AC and non-wireless device using a LAN cable.
To change the operating mode, start the BR-500AC in configuration mode. For details,
refer to
5-1. How to Access Web Configuration Interface
.
Confirm the STATUS LED turns
or blinks green
Confirm the WLAN LED turns green
BR-500AC