Silex technology BR-500AC, User Manual

Page: 41 / 128

4. How to Configure BR-500AC
35
2.
Connect the AC adaptor to the BR-500AC and the AC plug to the outlet.
3.
Turn on the non-wireless device connected to the BR-500AC.
During the MAC address resolution, the WLAN LED and STATUS LED will flash green
alternately. When the LED status has changed from it, the BR-500AC will be ready to use.
You can use the non-wireless device over a wireless network.
- Depending on the non-wireless device you have connected, further network settings may need to be
configured to that device. In such a case, please configure it according to the operating manual that came
with your device.
- When you turn on the BR-500AC and your non-wireless device, be sure to turn on the BR-500AC first. Do
not press the push switch then.
Note
BR-500AC
AC adaptor
Electrical Outlet
The LEDs flash Green alternately during
the MAC address resolution
BR-500AC