Silex technology BR-500AC, User Manual

Page: 120 / 128

114
BR-500AC User's Manual
TCP/IP - TCP/IP Configuration - TCP/IP Configuration
DHCP Client
Details Enable/Disable the DHCP protocol.
To assign an IP address using DHCP, the DHCP server must be running in your
subnetwork.
Range ENABLE/DISABLE
Default Value
ENABLE
IP Address
Details Set the IP address.
If the DHCP is enabled on your network, the IP Address obtained from it will be
applied.
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
Subnet Mask
Details
Set the subnet mask.
If the DHCP is enabled on your network, the Subnet Mask obtained from it will
be applied.
Range
0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
Note When set to "0.0.0.0", a subnet mask appropriate for the IP address is
automatically assigned.
Default Gateway
Details Set the gateway address.
If "0.0.0.0" is set, this setting is disabled. When the DHCP is enabled on your
network, the Default Gateway obtained from it will be applied.
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
TCP/IP - TCP/IP Configuration - General Configuration
Host Name
Details Set the host name. Be sure to use a unique name that is not used by other
devices.
Range
1-15 characters
* The following symbols and spaces cannot be used.
`~!@#$^&*()=+[]{}\|;:'",<>/?
Default Value
BR500-xxxxxx (xxxxxx is the last 6 digits on MAC address of the BR-500AC.)