Silex technology BR-500AC, User Manual

Page: 31 / 128

3. Before You Begin
25
- Two PCs are required for this configuration; one for the BR-500AC and the other one for your Access Point.
Wireless Configuration Using Smart Wireless Setup (PIN Code)
In this configuration method, you can automatically configure the wireless settings by
entering the PIN code of BR-500AC on your Access Point (wireless router).
The PIN code can be identified from the Web configuration interface of BR-500AC. To access
the Web configuration interface, connect the BR-500AC directly to a PC using a LAN cable
and start it in Configuration Mode.
You will not have to get wireless setting information beforehand, as configuration is
automatically handled by the BR-500AC and your Access Point. For this configuration
method, an Access Point supporting WPS(Wi-Fi Protected Setup) is required. To see if your
Access Point supports WPS, refer to the operation manual that came with your Access Point
or contact the manufacturer.
Check the PIN code
Register the PIN code
BR-500AC
LAN Cable
PC
PC
Access Point
(Wireless Router)
Note