Silex technology BR-500AC, User Manual

Page: 16 / 128

10
BR-500AC User's Manual
2-2. Parts and Functions
The parts name and functions are as follows:
Front
(1) Push Switch Start in Configuration Mode Press and hold this switch for 5 sec while BR-500AC is active.
Wireless configuration using
Smart Wireless Setup
Press and hold this switch for 10 sec while BR-500AC is active.
Factory default configuration Press and hold the push switch while turning on BR-500AC.
Release the switch when the WLAN LED turns green and then
to red.
(2) Link LED
(Green/Orange)
ON (Green) Linked in wired LAN(1000BASE-T).
BLINK (Green) Receiving packets in wired LAN(1000BASE-T).
ON (Orange) Linked in wired LAN(100BASE-TX/10BASE-T).
BLINK (Orange) Receiving packets in wired LAN(100BASE-TX/10BASE-T).
OFF
Wired LAN is not connected.
(3) LAN port Connect a LAN cable.
(4) Power LED (Yellow) ON (Yellow) Powered on.
OFF Powered off.
(5) Connector Connect an AC adaptor.