UNOCODE PRO
Operating manual - English
80
Copyright Silca 2017
8.8 A
CCESS
TO
BACK
COMPARTMENT
To gain access to the back compartment, proceed as follows:
1) turn the machine off and unplug it from its power supply cable.
2) remove the vacuum system’s connector (U2) (fig. 54).
3) unscrew the 6 (M1) screws that secure the back panel (fig. 54) thus removing it.
Fig. 54
8.9 A
CCESS
TO
BOTTOM
COMPARTMENT
To gain access to the bottom compartment, proceed as follows:
1) turn the machine off and unplug it from its power supply cable.
2) remove the vacuum system’s connector (U2) (fig. 54).
3) turn the machine on its back side.
4) remove the machine’s bottom panel by unscrewing the 8 (L1) screws.
Fig. 55
M1
U2
L1
