Operating manual - English
UNOCODE PRO
Copyright Silca 2017
27
• Press F1 to set positive values (+).
• Press F2 to set negative values (-).
• Press F3 to cancel the adjustments made.
Adjustments possible for depth (-30 to +30 hundredths
of a mm):
-
one value (positive or negative) raises or lowers all cuts.
Adjustments possible for spaces (-30 to +30 hundredths
of a mm):
-
one value (positive or negative) moves all cuts (from the
stop) to the left or right.
Press STOP to exit.
Warning! The presence of this symbol indicates that adjustments to the card have been
applied!
3) Press ENTER to continue.
Clamp: V100/*
The special symbol (asterisk) means that the cuts will be made by electric
contact
therefore it is unnecessary to select the clamp side
.
Pos.: 0
Place the key to be cut into the V100 clamp (cutter side) using the stop that
is shown
.
Cutter: U01W
cutter to use.
Pieces:
enter the quantity of keys to be cut
(max.999).
F1
F2
F3
