UNOCODE PRO
Operating manual - English
54
Copyright Silca 2017
This test can be carried out only when an automatic feeder (or other
optional component) is installed on the machine.
6.10.4
DIGITAL OUTLETS TESTS
Use the up/down arrow keys to move onto the required field, lower
the safety shield and press START; it will go from OFF to ON.
-
In the case of the cutter, the motor will also start.
-
In the case of the cutting side or reading lamp, the one in question
will illuminate momentarily.
Note: if this is not so, contact Silca’s Technical Assistance Dept.
This test (Exit...) can be carried out only when an automatic feeder
(or other optional component) is installed on the machine.
6.10.5
KEYPAD TEST
Press all keys (except STOP) one at time and verify that for every
key pressed the display shows the same key circled. Press STOP at
the end of the operation to quit the test.
Note: if this is not so, contact Silca’s Technical Assistance Dept.
6.10.6
DISPLAY TEST
Press ENTER repeatedly to verify changes in the background
colour.
Note: if no changes are noticed, contact Silca’s technical
assistance department.
Press STOP to exit Test.
