UNOCODE PRO
Operating manual - English
26
Copyright Silca 2017
Fig. 21
• Press F1 to consult the cutting parameters on the card.
Press STOP to exit.
• Press F2 to set up manual adjustment of cutting depths
and spaces (the adjustment values entered can be saved
as User Parameters).
Card No
Number of cuts per side for current key
Cutting
Symbols associated to cutting depths
Symbols allowed
Adapter if applicable
Clamp to use
F1
Key blank measurements
Cutting angle
Symbols associated to cutting depths
Cutting spaces
Base of the cuts
Measuring unit
Key stop
F2
