![background image](http://html1.mh-extra.com/html/sigma/3-30k/3-30k_operating-manual_1267902054.webp)
3-30K
Using the Centrifuge – Spincontrol Professional
54
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
Function
Open lid after run
The Auto-Lid-Open function must be activated so that the lid opens
automatically at the end of the operation.
When the lid is open, the cooling is not active. Samples may warm
up!
Program rotation
See chapter 6.4.4.4 "Automatic Program rotation"
Run time from set speed
If this function is active, the runtime will not be measured until the set
speed is reached. The clock symbol "
!
" will be displayed in the
runtime field in the standard menu. If a free acceleration curve is
selected, this setting has no effect. The symbol will not be displayed
although the option is selected.
Start delay
If the start delay function is active, the centrifuge will not start until the
preset time has elapsed. The symbol " " will be displayed in the time
field.
Display
Temperature unit
Select between °C (Celsius) and °F (Fahrenheit)
Language
Various languages are available.
If a language is selected by mistake, it can be changed on any screen
as follows:
Press and hold the stop key.
Turn the function knob one notch to the left and then one notch to
the right.
Release the stop key. The window "Language" will be displayed.
Select the desired language.
Speed/RCF fine and Runtime fine
This menu can be used to preselect the set speed in steps of 1 rpm
(instead of 100 rpm), the rcf-value in steps of 1xg (instead of 10xg),
and the set time in steps of 1 min or 1 sec (instead o 10 min or 10
sec).
Regardless of the fine adjustment, the interval will increase if the
knob is turned quickly.