3-30K
Technical Data
72
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
10 Technical Data
Manufacturer:
S I G M A Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Type:
3-30K
Electr. Connection:
Protection class:
IP Code:
see name plate
I
20
Connected load (kVA):
Power consumption (kW):
Max. current consumption (A):
2.4
1.26
7.5 (at 220-240 V / 50 Hz)
Performance data
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kin. energy (Nm):
30 000
510
65 403
43 753
Other parameters
Time range:
Spincontrol Comfort
Spincontrol Professional
Temperature range:
Heater (Special equipment):
Storage locations:
Spincontrol Comfort
Spincontrol Professional
short run, continuous run,
10 sec – 9 h 59 min
10 sec – 99 h 59 min
-20 to +40°C
-20 to +60°C
50
60
Physical data
Height (mm):
Height with opened lid (mm) :
Width (mm):
Depth (mm):
Weight (kg):
EMC as per EN 61326:
Noise level (dBA):
460
890
570
616
100
Class B
63 (at max. speed)
Fig. 10.1: Technical Data
10.1 Ambient Conditions
The figures are valid for an ambient temperature of +23°C 2 °C
and a nominal voltage 10 % . The minimum temperature is
< +4 °C and depends on the rotor type, speed, and ambient
temperature.
Allowable ambient tempe5°C to +35°C.
Max. relative humidity of air 80% up to 31°C with a linear
decrease to 67% relative humidity of air at 35°C.
Special equipment Heater: In order to reach the stated final
temperature, the rotor and buckets must be preheated by running
at approximately 1,500 rpm. The maximum rotor temperature that
can actually be reached is 40-60°C, depending on the rotor and
speed.
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
