3-30K
Using the Centrifuge – Spincontrol Professional
58
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
6.4.4.2 Saving a Program
Enter the parameters that are to be included in the program.
Select the option „Progr“ and confirm the selection. The program
selection list will be displayed.
Select a storage location from the program selection list.
Save the program under the desired name. The characters can
be entered when the cursor flashes in the text field. Turn the
function knob in order to select a character and press it to confirm
the selection. Then, press the knob again in order to enter the
next characters. The maximum number of characters is 19.
When the program name is complete, select the option “save” and
confirm it.
The program is now saved.
Fig. 6.40: Saving a program
6.4.4.3 Deleting a Program
Select the option „Progr“ and confirm the selection. The program
selection list will be displayed.
Select the desired program.
Select the option "Delete" and confirm it.
The program is now deleted.
Fig. 6.41: Deleting a program
